Best Climbing Tree Stand Reviews
Climbing Tree stands are among the most vital item in a hunters gear checklist. Designed by hunters for hunters, the capability to stay out of eye-level and off the ground which gives the best vantage point for hunting. There are a couple of famous trees stand types described in hunting communities and forums, and each one has its benefit over the type of hunting and terrain location.
One of the most advised types is the climbing tree stand. Climbing tree stands come in 2 part system, the bottom of the standing platform and top is the seat platform.
Are Climbing Tree Stands Safe?
While standing on a little platform where everything and your life depends on some bolt bonded or cable around a tree does not look so grounded for safety at all, climbing tree stands are fully secure to use. You can climb simply and secure yourself comfortably within the stand. The full setup feels secure than any other type of tree stand.
Shocking, though, most accidents do not happen from stand malfunction, but when the hunter wrongly dances off the top and takes an awkward action without a safety harness. With that said, forever wear a backup/secondary safety harness around your body while on any tree climbing stand.
Advantages of climbing tree stands
Versatile
When hunting largely on public grounds, there is not a choice to install a permanent tree stand. This is why portable climbing tree stands are the most famous choice among hunters.
Portable
Some tree stands can be weighty, but there are also models that they are designed with built-in backpack straps, which make it amazingly simple to carry around. It permits you to be mobile – bring it everywhere, hunt anywhere you pick.
Simple to Use
Think that you cannot handle another hard mechanism aside from your shooting gear? Climbing tree stands are simple to set up. There are cable retention systems that would not need you fumbling over nuts, bolts or pins.
Very secure to Use
There are climbing tree stands with enclosure bars and boot strip-ups that keep you safe within your post. With these, you don’t need to hesitate about slipping off the platform while you descent or climb.
Keeps you relax with on Watch
Foot rests, armrests, and some even have a thick seat cushion. There are closed or open systems that permit you to either sit high or stand upright and hunt amazingly.
Best Climbing Treestands 2020
There is no doubt that a climbing tree stands is the best choice when you want to hunt and cover a big area. You can set it up wherever you go and no need to go back on each spot. On the other hand, if you have spotted your best hunting spots, you can simply install hang-on stands and move within those points from time to time.
| Name | Weighs | Our Ratings | |
|---|---|---|---|
| Guide Gear Extreme | 20 lbs | A+ | Price on Amazon |
| Summit Viper SD | 20 lbs | A+ | Price on Amazon |
| Hunting Hang On | 18 lbs | A | Price on Amazon |
| Summit 180 Max SD | 23 lbs | B | Price on Amazon |
| Hunting Deer Bow | 20 lbs | A | Price on Amazon |
| OpenShot SD | 15 lbs | A+ | Price on Amazon |
| Mini Viper SD | 18 lbs | B | Price on Amazon |
| Viper SD | 20 lbs | B | Price on Amazon |
| X-Stand Deluxe | 10 lbs | A+ | Price on Amazon |
The following are reviews of the top 9 climbing stands which have been classified into which category they are mostly used for.
1. Guide Gear Extreme Deluxe Hunting – Climber Tree Stand
Guide gear extreme stands does weight more (thirty three pounds) than many other brands of tree stands, it does provide an amazing stability in exchange for the further load. Going up a tree using this stand permit you a secure ascent while also providing safety once you start and stop hunting.
Being capable to trust the stand you are on is a remarkable feeling and provides you more freedom when aiming your weapon being capable to stand up for getting the top shot is forever a bonus when in a tree stand. Anyway, if you are a climbing a tree with a complete backpack of things like water, food, and ammo, you should keep in mind the significance of packing sparingly and evenly. Doing so will support you have a much simpler time while getting up a tree.
Remember, if you use a bow, forever take the time to consider your shot before taking it. You want to ensure your arrow hits in a place that will permit enough blood flow to follow while also entertaining at least one heart and the lung. Targeting through both lungs can bring your deer down, but also maybe a hurt that does not bleed out a trail simple to follow.
Costing around $80, the Guide Gear Extreme tree stand provides remarkable specs that work to improve your time spent in hunting. One of the most vital parts of your hunting experience is your relaxation. You may be in a tree stand for 5 hours or more before you get a perfect shot at a deer, so picking a stand that can give you relaxation is necessary.
Features
- Sturdy, big 19 x 26 foot platform, especially handy when you want to stand up for a stench or to get the best shoot
- Climbing arm rests and seat bar are also relaxed padded
- Sitting for more than few hours is simple with sling seat, protected in 1 foam and is 10 x 17 plenty of room for changing the position.
- Lean back on the 18x 14 padded backrest and love nature
- This stand can support up to three hundred pounds.
Pros
- Has a three hundred pounds capacity
- Covered in padded camouflage
- Foot straps made out of nylon
Cons
- Very heavy
2. Summit Treestands Viper SD – Climbing Tree Stand
Relax, lightweight, and easy to set up, the summit Viper SD climbing tree stand gives you mobility to hunt wherever you need to whatever you want to. Weighing just 20 lbs, the Viper has a very portable aluminum frame that is simply carried in your back, permitting for a stress less and silent entry. The summit viper SD specs include deadening technology, a fast draw cable attachment, and RapidClimb stirrups.
Engineered to keep you relax and concealed, the Viper SD is Summit most famous model and has been for seventeen years. Feature a foam-padded seat that can be increased for bow hunting and lowered for gun hunting, the Viper SD full-perimeter frame permits for sit-down and stand-up configurations while a strong front bar permits simple climbing and twins as a gun test. Comfortable, quiet, and safe, the Viper weights in at a very portable twenty pounds, with a nesting frame that packs on your back.
Cable Retention System
The quickest, simplest and quietest cable attachment system ever invented, no fumbling with knobs, pins, bolts or nuts necessary. Size the cable to your tree diameter; add the cable into retention bracket, and the QuietDraw active locks securely in place. Pull the trigger to delete the stand from the tree.
Proven Stability
Built to last, the Viper SD climbing tree stand is protected by Summit five year limited warranty.
Climbing Stirrups
A standard spec on all summit climbing stands, RapidClimb stirrups are simple to use and adjustable to fit any boot. Designed to keep your boot secure link to the platform. These ergonomic stirrups permit you to safety and quickly climb to your wanted height.
Structural Enhancement
Best standard extruded aluminum and precision welds give highest strength and rigidity. Each joint is locked into location before welding and designed so that stress on the welds is decreased, therefore a stand is powerful, safe and silent.
Pros
- Weight 20 lbs, and grips up to 300 lbs
- Suspended foam padded seat with backrest
- Contains full body-fall arrest harness system and all important hardware
Cons
- Very large
- Not easy to carry
3. Guide Gear Hunting Hang On – Tree Stand
The guide gear hunting tree standing incorporates ultraportable, lightweight design that is sure to better your hunting experience. Weighing in at a mere eighteen pounds, this tree stand can provide you the distinct benefit you are looking for. The slim profit includes the full usability of this product. This unit is simple to set up and backpack, so you can take it with you on all of your journeys and get to the hunt faster than ever before.
The seat of this unit specs a thick padding that is designed to keep you relax for hours. The foot rests also specs padding to help decrease fatigue attributed to discomfort. Stalking your prey from a tree stand needs stealthiness and patience, this unit is designed to raise both of these attributes. A twin tube steel frame gives highest strength from the lightest possible platform. This amazing stand can support up to three hundred pounds of weight security. This flip up seats has improved ergonomics that support to keep you relax and alert when out on the hunt. Get the drop on your prey with this very effective climbing tree stand. No need to hesitate about the rest because this unit is powder coated to decrease moisture damage. This is a remarkable addition that betters teardown times significantly and decreases the full life expectancy of this unit by stopping corrosion and rust from taking hold. This deer stand contains a FAS safety harness. This provides a higher level of security against accidents and can support to stop injuries that come as an outcome of falls.
Pros
- Simple to assemble
- Very affordable
- Lightweight
Cons
- You may need to buy some extra straps
- Barebones model
4. Summit 180 Max SD – Climbing Tree Stand
Three tree stand provides a relaxing vantage point in the stand with a bit more room and ability for larger hunters and those who favor some plus space. Designed for flexible positioning the Summit 180 Max is furnished with an adjustable height reversible surround seat that permits you to sit facing the tree or reversed with the seat against the tree. Additional, the premium standard precision welded aluminum extended best frame provides benefits for tall hunters, yet keeps the weight down to thirty three pounds. The bigger six channel aluminum platform provides plus space to move around with a kind 350-pound highest weight capacity.
Design for concealment the climbing tree stand specs sound deadening technology for sound control as well as Mossy Oak Breakup Infinity camouflage.
Verified Reliability:
- Built at least the 180 Max SD climbing tree stand is protected by Summit 5 year limited warranty.
- All necessary pads hardware straps and ropes
- The 180 Max SD climbing tree stand appears complete with a four point safety harness.
SummitMark
Summit QuickDraw cable retention system is a vital innovation in climbing tree stands. It is also the quickest and quietest cable link system ever invented. Once the cable is sized for the tree diameter all you have to do is insert the cable into QuickDraw bracket of the suspension arm, pull the active and cable safety locks into location.
DeadMetal
Summit Dead Metal sound deadening technology works by filling in critical parts of the platform with a custom engineered spreading foam to decrease unintentional noises caused by movement on the platform. Once the cable is sized for the 3 diameters all you have to perform is insert the cable into the QuickDraw bracket of the suspension arm, pull the active trigger and the cable safety locks into place.
SummitLokt
Summit uses best standard extruded aluminum and SummitLokt with accuracy welds for absolute rigidity and higher strength. Every joint is locked into location before welding and each point is designed so the stress on the weld is decreased. The outcome is a noise-free stand that is powerful, secure and safe.
SummitMark1
Amazingly simple to use, they are provided as a standard spec on all summit climbing stands.
Features
- Six channel aluminum platform frame with latest dead metal sound deadening technology
- Mossy Oak breakup infinity Camo
- Relax reversible foam seat with backrest
- Extended climber frame/aluminum seat
- Camo backpack straps
- Wraparound camo pad
- Rapid climb stirrups
- Four-point FAS with safety strap and linked SRS strap
- Stand umbilical rope
- Green unity strap
Pros
- Custom engineered
- Climb stirrups
- Hardware straps and ropes
Cons
- Very low safety harness
- Very heavy
5. Hunting Deer Bow Game Hunt Portable – Climber Tree Stand
This tree climber is engineered to be lightweight and rock-strong stability, providing you an amazing fit for almost any tree. It is sure to give comfort for long hunts, fishing while its roomy platform with its traction ridges includes safety.
Features
- Light weight sit and trustworthy climb stand
- 300 lbs weight limit
- Foot and seat platform rest for simple travel
- Padded climbing bar can be used as a gun test
- Climbing braces give safe footing
- Relax foam seat with complete back rest
- Sturdy iron frame supports 300 lbs
- Standard twin purpose for both rifle and bow hunting
Pros
- 300 lbs weight limit
- Comfortable seat
- Contain safety harness
- Amazing fit for almost any tree
Cons
- Very costly
6. Summit OpenShot SD – Climbing Tree Stand
The Summit OpenShot SD climbing tree stand is designed for hunters who like to go far into the deepest forests. Weighing in at just fifteen pounds, the OpenShot SD is designed to be portable and compact without sacrificing relaxation when you settle down to hunt. The tree stand open front afford all-direction visibility, making the tree stand the best choice for bow hunting and it is furnished with a special folding seat inside the frame that folds up simply when you want to stand up against the tree. The folded seat then becomes a cushion for your back, permitting you to stand more amazingly for a longer period of time.
For highest concealment, the OpenShot specs sound best technology to decrease starling noise in the field, while the Mossy Oak Breakup infinity camo saves you from drawing unnecessary focus to yourself.
Summit Dead Metal sound deadening technology jobs by filling in critical parts of the platform with a custom engineered expanding foam to decrease unintentional noises caused by movement on the platform.
Features
- Dead Metal sound deadening technology
- Comfortable, light and compact
- SummitLokt precision welding
- Contains all necessary hardware, pads, straps and ropes
- Five year limited warranty
Pros
- Very compact
- Great color
- Light weight
Cons
- Not perfect design
- safety issues
7. Summit Mini Viper SD – Climbing Tree Stand
Weighing in at only eighteen pounds, the Summit Mini Viper SD is summit Tree stand portable climbing tree stand. Designed for optimized stealth and portability, the Viper SD is a strong choice for bow hunting or rifle and for hunters who demand a very portable stand. The Mini Viper SD specs a comfortable foam-padded seat that can be raised for bow hunting. The strong front bar makes a climbing easier and jobs well as a gun test. The Mini Viper SD is also very portable with a frame that nests combine and packs on your back.
A famous climbing tree stand since its introduction in 1988, the actual Viper SD has been noted for its special blending of shape, ease of use, innovative cable attachment system, and portability. The actual Viper has been updated with aluminum construction, a more relaxing seat, Quick Draw cable attachment, Bent Cable arms, RapidClimb and the most recent innovation, sound deadening technology to decrease noise that may compromise your concealment.
Features
- QuickDraw retention system with two coated steel climbing cables
- Climber frame/aluminum seat
- Aluminum 4-channel platform frame
- Dead Metal SD technology
- Foam seat with backrest
- Came backup straps
- Four point FAS with safety strap and link SRF strap
- Green utility strap for further security and comfort
- Includes written instructional DVD and instruction
- Stand umbilical rope keeps your platform and best security fastened.
Pros
- SummitLokt precision welding
- Dead Metal Sound Deadening Technology
- RapidClimb climbing stirrups
- RapidClimb climbing stirrups
- Contains all necessary hardware, pads, straps and ropes
Cons
- Wrap around bar is a little sung
8. Summit Viper SD – Tree Stand
The Viper SD gives a new way to survey your hunting terrain as you stay safe and high up in the trees. This tree stand is a lot more than just a portable model as it represents as an exquisite mixture of roominess, comfort, versatility, light weight to make sure that everything hunting trips is remarkable and productive for the hunting enthusiast. These are the factors why this tree stand continues to be a best for almost 2 decades and running.
The unit comes with amazing DeadMetal sound deadening SD technology that makes sure decreased noise thanks to the critical parts of the platform being filled in with specialty foam that spreads so unintentional noises get dampened when you move on the platform. Additional, the QuickDraw cable retention system exclusive to Summit make sure quick and quiet cable attachment system that is easy to maximize. Once you get the perfect cable sizing for the diameter of the tree trunk, just insert the cable into the suspension arm bracket then pull the active to lock the cable firmly into location. This gets rid of the need to fumble with tricky bolts and nuts and pins, make sure a safe yet silent attachment system.
Equipped with an aluminum five channel platform frame, this tree stand ensures ample support for you. It comes with the Summit Lokt precision welding, which utilizes premium standard extruded aluminum plus exclusive precision welds to deliver top rating strength and best toughness. With every joint virtually locked in location prior to the welding process, the tree stand joints make sure minimal stress delivery to them. This means you have a powerful, safe and secure tree stand built to be deadly quiet.
The tree stand is designed to last for lots of hunting seasons and even ships to you with a dependable 5 year limited warranty as your promise of full standard and craftsmanship. The 4 point safety harness permits safe, issue-free and effortless descent and ascent. The backrest includes to the comfort give by the foam set, so you can settle simply into your hunting stance and have a relax time waiting for your order.
Features
- Lightweight climbing tree stand – full with four point safety harness, RapidClimb stirrups and all important pads, ropes, hardware and straps
- Specs Summit sound deadening SD technology to additional improve concealment
- Five channel aluminum platform, multi-objective, padded, adjustable seat, the strong front bar for climbing and to serve as a gun rest.
- Three hundred pound weight limit fits tree with eight to twenty inch diameters
Pros
- Stand umbilical rope
- Green utility strap
- Camo backpack straps
- Rapid Climb stirrups
Cons
- Old design
- Very costly
9. X-Stand Deluxe Hunting – Climbing Tree Stand
X-stand hunting tree stand is made from powerful aluminum construction hence it is strong, does not rust simply and will last for a long time. Weighing only 10 lbs, it is lightweight thus making it moveable as it is simple to carry and does not take up much load.
Also, it folds flat so you can simply fold it to be packed after use. Due to this fold flat-spec, you will just spend a little time in unpacking and packing it. Also, this strong stand comes with a built-in backpack with straps for simple transportation of the tree stand.
On the other hand, the seat bar and armrest are light, padded, and gives the highest comfort so you can sit for hours without feeling sorer when hunting. The seats are also adjustable if you don’t want the seat for example, you can push it to the back. It slides silently when adjusted so it would not distract you during hunting.
Additional, this product grips up to a capability of 300 lbs so you don’t have to hesitate about your weight combined with the hunting gear form affecting the tree stand. It is extremely sturdy and stable on the tree so your safety is promised and there is extremely low risk of your falling down.
The instructions to assemble are badly printed so you are suggested to watch videos and do some self-learning or favor to the customer service. The setup is not too difficult you understand the operating mechanism of this product.
The safety and shoulder straps harness are not too relax hence if you need include comfort, you can separately buy a harness and strap of a higher standard. The straps and harness are important to make sure your safety when climbing and hunting the tree.
The rubber coating on some parts of this item decreases the noise hence providing remarkable hunting experience. Also, there is a lot of leg room on the platform for more relaxation and so you can hunt better by getting a more perfect goal as you can simply adjust your position.
Finally, this hunting gear operates on spring loaded pin technique, which is not the top technique because it is very tedious as you to hold the pint out, lift and tilt the stand and feed the cable to link it.
Pros
- Big platform room
- Spring loaded pin technique
- Padded seat bar and armrest
Cons
- Not easy to adjust
Picking the Right Climbing Tree Stand for your Hunting Style
Depending on the hunting location and conditions, the tree stand can come in several kinds or configuration. Pick the type that suits your purpose or need.
A climber tree stands consists of 2 components, the footrest and the seat. The stand is linked to the tree at ground level and is then utilized to an inch or worn up the tree by moving single section and keeping your weight on other part. The fulcrum-type configuration is one of the most relax tree stands on the market and also provides simple setup. Anyway, it can only work on limited types of trees. You cannot set it up on a tree that is too large or too little, has low hanging branches or does not have a straight trunk to help the climbing treestand. This type is ideal for the hunter who is physically fit since it can be carried to the place on the hunting day itself and set up right there. Eliminating the need for any plus equipment, the climber gives effortless portability.
A fixed or lock-on tree stand is relatively simple, lightweight, and fast to put combine and attaches to a big range of trees. Many models come with backpack-type straps for issue-free portability. Most are truly basic or bare-bones structures with little seats and pretty to no padding, with just a large enough platform to rest the feet on. This kind is left in an actual position for all-day use. It does not spec climbing ability so you need to have a ladder, climbing sticks or tree steps to get the unit to your wanted height or to get to it from the ground. The fixed climbing tree stand has to be set up a few days ahead of the hunting day. The largest selling point of a lock-on unit is its capability to links to many kinds of tree such as those with big diameter trunks or many limbs. It is also best for stealth hunting.
A ladder tree stand is, for the most part a ladder that links to trees. The platform on top gives ample room to shoot and stand. Some models already ship with a seat, while others need making a separate purchase. Lots of ladder stands are made for a more than one hunter so you can take along a hunting buddy, a videographer or a child. This tree stand configuration is pretty heavy and will need between 2 to 3 people to set up. Typically, a ladder stand is left in a location for the full hunting season. If stability, comfort, and safety are primary considerations, a ladder stand is remarkable.
A fourth type of climbing tree stand is the tower or tripod. It is specially designed to sit on 3 or 4 supporting legs, with a padded seat and platform and perhaps some type of enclosure in some models. You can get an all-around view of the hunting terrain on a generally rotating platform that swivels 30 degrees. Many models do not come with a platform or enclosure blind so you may have to make a separate purchase for this component.
Safety
A poorly constructed or damaged tree stand could simply fail under load, so it is vital that you ensure it has a strong build and you would not slip from the steps or lose your footing while climbing. Luckily, with a set of right safety gear, right maintenance and use, as well as careful tree stands use habits, a climbing tree stand could improve your hunting experience. Keep in mind to check that the unit itself is in right working condition. Use a 3 or 4 point climbing harness or fall arrest system is forever a safe practice that generally rope just cannot match. Use a rope only to lower or raise hunting tool from and to the ground. Ensure not to nod off while on the climbing tree stand.
Climbing Tree Stand Accessories
Having all types of hunting gear with you on the tree stand can cramp the space up. You may invest in some further accessories to make the most of the tree stand. Some of those extras contain shelves, a hang-it all belt, or bow holder and riffle that you simply safe to the stand itself or the tree so you can have simple access while having ample space for all the gears you want. With a cover system or branch bracket that you attach to the climbing stand or tree, you can get included concealment among the limbs and branches of the tree around you.
Final Words
There are 10 best climbing tree stand 2020 which I found useful in the market. I hope that the details provided will bring you a valued information and will help you in decision-making. Which other tree stands do you think is truly good? Please share with me in the comment box below.